GOLDEN MASTER

FINALIZE!

The Golden Master from Endorphin.es is a multi-band processor that takes inspiration from studio mastering and radio loudness units from the 1990s. It gives control over the EQ, compression, and mid/side processing of incoming audio.

Thanks to the 16-bit/96kHz audio fidelity, you'll get incredible processing power. It features three bands - low, medium, and high - each handling a distinct portion of the audio spectrum. These controls feature a single knob that both boosts and cuts signals. Set the overall loudness limit of your sounds, and the brickwall limiter ensures all your sounds stay in check. This multi-band effect is the perfect end-of-chain module, ensuring that anything you throw at it sounds dynamic and full.

• Multi-band processor inspired by mastering tools from the 1990s: adds punch and dynamics to your sound

• Compression, EQ, and mid/side processing

• Three frequency bands with +7 db boost and -20 db cut

• Brickwall limiter sets upper limit of signals

• 16-bit/96kHz audio I/O with 32 bits internal processing

• Enhance/mute buttons

• available in 1U / 22HP version and in Pedal

  
  Power consumptions:

• 135 mA +12V

• 25 mA -12V

• 0 mA 5V

  Dimensions:

• 6 HP

• 30 mm deep

Modulargrid: BLACK

Manual: 1U & 3U NEW MANUAL / OLD MANUAL

Firmware Update: latest release: V5 GOOD BETA / 27-MAR-2024

Want to pimp up your module’s look? Check its faceplate replacement & knobs

FAQ:

I hear some noise from my module. First of all, check if audio input gain trimmer and input 1/2 trimmer on the backside in 6hp module are fully CCW to ensure you have a proper gain staging. Second: update the module to the latest firmware (see above).

Rainbow cable pinout. Side red/brown pair of pins always correspond to -12V similar as with typical gray ribbon cable.